|
Keynote Lecture
Power Electronics - Its Impact on Energy and Environment

Prof. Bimal K. Bose
Department of Electrical and Computer Engineering
The University of Tennessee
Knoxville, TN 37996-2100, USA
Tel- (865) 974-8398
Fax: (865) 974-5483
E-mail: bbose@utk.edu
Abstract: Energy has been the life-blood for continuing progress of
human civilization. Since the beginning of industrial revolution around two
centuries ago, the global energy consumption has increased dramatically to
accelerate our living standard, particularly in the industrialized nations.
Par-capita energy consumption, particularly in electrical form, has been a
barometer of a nation’s economic prosperity. Today, the major portion of
world’s electrical energy is generated by fossil fuel and nuclear power
plants. Fossil fuels have limited resources, and are expected to last no
more than two hundred years. Besides, burning of fossil fuels creates
environmental pollution problems that causes global warming. Global warming,
at present, is a very serious concern in our society because of its
disastrous consequences in the long run. The nuclear energy is free from
environmental pollution, but it has safety and waste disposal problems. The
challenge before us: How can we continuously improve our living standard,
but at the same time, maintain cleaner and safer environment? Increasing
emphasis on renewable energy sources, to some extent, solve the above
problems, but conservation of energy with more efficient use of electricity
is the definite way to mitigate these problems. Power electronics can play a
major role in global energy conservation in addition to its traditional role
in industrial automation and energy systems.
The presentation will begin with a broad introduction of energy generation,
depletion of fuel resources, environmental pollution and energy conservation
scenarios. There will be particular emphasis on global warming problem. The
important role of power electronics in energy conservation will be reviewed
in broad perspective. The application examples will include wind energy,
photovoltaic, fuel cell and hybrid vehicles.
Brief Biography of the Speaker:
Dr. Bimal K. Bose has held the position of Condra Chair of Excellence
(Endowed Chair) in Power Electronics at the University of Tennessee,
Knoxville since 1987, where he was responsible for teaching and research
program in power electronics and motor drives. Concurrently, he served as
Distinguished Scientist (1989-2000) and Chief Scientist (1987-1989) of EPRI-Power
Electronics Applications Center, Knoxville,TN. Prior to this, he was a
Research Engineer in the GE Corporate R & D Center (now GE Global Research
Center), Schenectady, NY, for 11 years (1976-1987), an Associate Professor
of Electrical Engineering, Rensselaer Polytechnic Institute, Troy, NY, for
five years (1971-1976), and a faculty member at Bengal Engineering and
Science University for 11 years (1960-1971). He is specialized in power
electronics and motor drives, specially including power converters, PWM
techniques, microcomputer/DSP control, electric/hybrid vehicle drives,
renewable energy systems, and artificial intelligence (expert system, fuzzy
logic and neural network) applications in power electronics and motor
drives. He has been power electronics consultant in a large number of
industries. He holds a Honorary Professorship in Shanghai University (1991),
China University of Mining and Technology (1995), X’ian Mining University
(1998) , Huazhong University of Science and Technology (2002), and Honorary
Adviser of Beijing Power Electronics R & D Center (1990). He has authored
around 200 papers and holds 21 U.S. patents. He has authored/edited seven
books in power electronics: Power Electronics and Motor Drives – Advances
and Trends (Academic Press, 2006), Modern Power Electronics and AC Drives
(Prentice-Hall, 2002), Power Electronics and AC Drives (Prentice-Hall,
1986), Power Electronics and Variable Frequency Drives (Wiley/IEEE Press,
1997), Modern Power Electronics (IEEE Press, 1992), Microcomputer Control of
Power Electronics and Drives (IEEE Press, 1997), and Adjustable Speed AC
Drive Systems (IEEE Press, 1981). He has given tutorials, keynote addresses
and invited seminars extensively throughout the world.
Dr. Bose has served as a Distinguished Lecturer of IEEE in both the IAS and
IES, and is now Vice-Chair of the IAS Distinguished Lecturer Program.
Currently, he is a member of IEEE USA Energy Policy. He is a recipient of a
number of awards, including IEEE Power Electronics Society Newell Award
(2005), IEEE Millennium Medal (2000), IEEE Meritorius Achievement Award in
Continuing Education (1997), IEEE Lamme Gold Medal (1996), IEEE-IES Eugene
Mittelmann Award (for lifetime achievement in power electronics and motor
drives) (1994), IEEE Region 3 Outstanding Engineer Award (1994), IEEE-IAS
Outstanding Achievement Award (1993), Calcutta University Mouat Gold Medal
(1970), GE Silver Patent Medal (1986), GE Publication Award (1985), and a
number of IEEE prize paper awards. He also received the Distinguished
Alumnus Award (2006) from Bengal Engineering and Science University.
|